Vintage Lines Hide Modern Hellcat Muscle

3rd Gen HEMI projects and products.

Moderator: scottm

Post Reply
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Vintage Lines Hide Modern Hellcat Muscle

Post by scottm »

Image

Vintage Lines Hide Modern Hellcat Muscle
Beauty is more than carbon-fiber-skin-deep with these retrofied Mopars from eXoMod.
https://www.motortrend.com/features/vin ... at-muscle/
The dance we do as hot-rodders typically goes like this: We find a classic car, strip it down to the bare body, and then rebuild it to suit our own, often modernized vision. With a pro touring- or restomod-type build, that includes adding a high-power modern EFI engine, modern brakes (often with ABS on the nicer builds), and amenities like air conditioning and a rockin' audio system. In essence, the classic lines of the old body are kept, and the newest performance and cruising technology is grafted to it. It's time-consuming and expensive, but it gives us the look we want along with modern performance.

But what if you did it the other way around? This would be where you took a modern performance car and added body panels to replicate the classic lines. This isn't a new idea, but to be honest we haven't loved the results in the past. The problem is that modern cars have modern dimensions and structures that don't always play nice with the lines of our classics. This is especially true around the windshield and A-pillars. For example, we remember a company that was trying to make a C5 Corvette look like a vintage C2 'Vette, but the windshield area just killed it since the C5's A-pillars were way too swept back for aerodynamics. It just looked wrong. We had yet to see one of these retrofied modern muscle cars done where the proportions were right, or at least close enough to still look good.

That was until we spied the builds from eXoMod Creations. It was their C68 CARBON build (a clever code for 1968 Charger) and it actually looked like a vintage Dodge Charger! Now, we're not saying it's an exact copy, but it certainly captures the soul of a '68-'70 Charger that's been given a 21st-Century makeover. You get all the modern performance and tech of a new Dodge Hellcat (707 hp) or even a Hellcat Redeye (807 hp) with the vintage vibe of its '60s-era ancestor. They are also currently offering the C69 CARBON, which is reskinned in carbon fiber to look like a 1969 Charger.

eXoMod Creations owes a thank you to Dodge for making this possible. You see, the C68 CARBON Charger is exactly the same length as a bone-stock 1968 Charger. It also has the exact same wheelbase! Add in that the windshield rake isn't nearly as extreme as some cars, such as Camaros and Corvettes, and you end up with proportions that are close enough to work. One area that changes, though, is the car's width, since the eXoMod C68 CARBON is a true widebody. This is done with the quarter-panels and fenders instead of the fender flares used on a modern widebody Dodge. The result of all this body-swap voodoo is a modern Dodge Hellcat that has the look of a vintage Charger, with the right proportions so that your eye doesn't dismiss it all as some sort of bait-and-switch deal.

As they said in that old Ginsu knife infomercial, "But wait—there's more!" You see, the new vintage-shaped body panels aren't stamped-steel, they're carbon-fiber. This means the new retro-modern Mopar is 400 pounds lighter than a factory Hellcat Challenger! The weight loss is akin to free horsepower for an already stupid-fast car. Oh, and the body panel swap retains Dodge's powertrain warranty.

The interior of the eXoMod cars stays pretty stock with the exception of better, Italian leather for the seats. All the high-tech options found on a new Hellcat are still there, so you have heated and cooled seats, launch control, and safety stuff like airbags and backup sensors.

eXoMod isn't stopping with Chargers. Other classic Mopars are getting the reskinned-in-carbon treatment as well. The D71 is styled after the 1971 Dodge Demon, and we have to say the rendering looks kickass. This ride, limited to just 25 vehicles, should be done around the summer of 2023. Like all the eXoMod cars there are tons of color, wheel, and trim options.

Want something wilder? How about a Hellcat reskinned to look like a 1969 Charger Daytona? Yep, big nose, big carbon-fiber wing, and tons of attitude. They are currently building this Daytona and hope to have it on display at November's MCACN event in Chicago. All the eXoMod conversions roll on high-end Forgeline wheels. Even these rollers, which look like vintage steelies, are in fact 20-inch billet Forgeline wheels!

Now this isn't an inexpensive proposition, but what is these days? Consider the cost of taking a 1968 Charger and building it into everything the 2022 Hellcat is. All the comfort, all the power, all the modern suspension parts, flush-mounted glass, and latest technology. A build like that would be hundreds of thousands and take an eternity to get done. eXoMod can convert your existing Challenger (all the way back to a 2011 R/T model year) for $275K and have it built, painted, and on the road in around 8 weeks! They also sell complete cars, customized to your tastes, starting at $400K for the 707-hp Hellcat or $450K for the 807-hp Redeye!

For us mere mortals, nearly half a million bucks falls into fantasy land, but you could easily spend that much, and more than likely more, adding all the Hellcat guts and carbon fiber to a vintage Mopar, and still not end up with a car capable of reliably making cross-country drives. This car drives like a new Hellcat because, in essence, it is a new Hellcat. In short, this is just another way to skin the proverbial feline; a way to get those classic-car lines we love along with the modern kickass performance we've become accustomed to. To window-shop or place an order, click on over to www.exomodcarbon.com. If you're at the 2022 SEMA show in Vegas, look for booth 24995 in the Hot Rod Alley, where a new purple car that's just being finished up will be on display.
More Photos: http://www.thehemi.com/gallery3/index.p ... C68-CARBON

These are definitely big bucks, but for those with the means these are awesome!

#Dodge #Charger #Hellcat #eXoMod #eXoModCreations #C68 #C68Carbon #HEMI
Post Reply