American Supercar: Your First Look at the 1,064-HP 2025 Chevrolet Corvette ZR1!
https://www.motortrend.com/news/2025-ch ... ok-review/
The Chevrolet Corvette just blew past the 800- and 900-horsepower barriers on its way to a claimed sub-10-second quarter mile and a top speed exceeding 215 mph. Powered by a flame-shooting, twin-turbo 5.5-liter V-8, the 2025 Chevrolet Corvette ZR1 makes a towering 1,064 horsepower—a 309-hp mega leap over the last car to wear the ZR1 badge.
A lot has changed in the five years since the previous ZR1 made its debut. Today’s most powerful cars run on batteries, and Corvette engines now push from behind the driver, yet the ZR1 persists as the supercar with a muscle-car mindset. Making its four-figure power rating even more outrageous, we expect it to cost at least $100,000 dollars less than the European exotica it’s built to beat.
Meet the Chevrolet LT7 Small-Block V-8
As with the 638-hp C6 ZR1 and the 755-hp C7 ZR1, the 2025 C8 Corvette ZR1’s tremendous output is the result of engineers squeezing as much power as possible from its small-block V-8 engine. “The reason they’re odd numbers is because we didn’t set a target horsepower ahead of time,” executive chief engineer Tadge Juechter said. “We want the most power technology will give us.”
In the case of the 2025 Chevy Corvette ZR1’s LT7 engine, the technology involves a rare combination of displacement, revs, and turbo boost. Like the Corvette Z06’s LT6, the LT7’s eight forged pistons spin a flat-plane crankshaft that unlocks a quicker- and higher-revving engine while also unleashing side-to-side vibrations severe enough that, if not mitigated, will shake the oil filter off the V-8. Automakers have traditionally kept this imbalance in check by limiting the displacement to 4.5 liters or less, but both Ford and Chevy have pushed higher with their recent V-8 screamers. For a flat-plane-crank V-8, 5.5 liters is positively huge.
Blowing the engine with two turbos rather than a supercharger keeps the inertia low to preserve the flat-plane high-rpm character. Torque peaks at 828 lb-ft at 6,000 rpm, the 1,064-hp max hits at 7,000 rpm, and redline is reached at an awesome 8,000 rpm. During a very short, very fast ride in the passenger seat at GM’s Milford Proving Grounds in Michigan, the LT7 emitted a loud, proud, star-spangled blare deeper than your typical flat-plane V-8, more of a wail than a howl.
Pointing speed sensors at the turbos allows the blowers to spin faster, with the compressor blade tips traveling up to 1.7 times the speed of sound. The turbine wheels are made of Mar, a nickel-based alloy with even greater heat tolerance than Inconel to withstand temperatures as high as 1,900 degrees Fahrenheit. At full chat, the engine runs on 20 psi of boost with so much air pumping through the cylinders that the exhaust exiting the four tailpipes pushes the car with 37 pounds of thrust.
Juechter insists the LT7 isn’t just a boosted version of the Z06’s LT6 engine. Development of the two V-8s nicknamed Gemini began in tandem and share a block casting, but Chevy says the ZR1 is built with unique internals, cams, and cylinder heads plus additional cooling measures, an extra oil scavenge stage, and a supplementary port fuel-injection system. For full details on what’s new and notable, read our deep dive on the 2025 Corvette ZR1’s LT7 engine.
Chevy promises us plenty of low-end punch, too, with the LT7 churning out more than 800 lb-ft of torque from 3,000 to 6,500 rpm. To cope with all that twist, the eight-speed dual-clutch automatic transmission is built with thicker gears, and the rear-wheel bolt pattern has grown from 120 to 130 millimeters (about 5.1 inches). The tire sidewalls read the same as on the Z06—either Michelin Pilot Sport 4S ZP or optional Pilot Sport Cup 2 R ZP in 275/30 ZR20 (97Y) up front and 345/25 ZR21 (104Y) out back—but the internal construction is modified to handle more extreme forces.
The Ultimate Corvette
With a 394-hp advantage, the 2025 Chevrolet C8 Corvette ZR1 will obliterate the naturally aspirated 670-hp C8 Z06 around a racetrack, but its mission is broader than laying down heroic lap times. The ZR1 team benchmarked the Porsche 911 GT2 RS and the Ferrari SF90 while aiming to build a car with more bandwidth for the road compared to the Z06.
In standard configuration, the ZR1 runs lower spring rates than the Z06 to deliver a more compliant ride. Upgrade to the ZTK package, though, and the ride is about as stiff as a Z06 with the Z07 go-faster package. The performance kit also includes the Cup 2 R tires and the aero package with the front dive planes and picnic-bench rear wing that help the car generate more than 1,200 pounds of downforce at Vmax. The base car with the low-drag, low-downforce aero kit is the top-speed king capable of more than 215 mph. Chevy’s not saying where the ZTK-equipped car will run out of steam, but reaching 205 mph felt effortless during our right-seat ride along. Yes, really, we hit 205 mph.
All new ZR1s sacrifice the frunk storage space to appease the engine-cooling gods, and yet there’s no fan pulling air across the front heat exchangers. Instead, a vertical wicker on the hood creates a low-pressure pocket over the extractor that draws air through. Coupes get new rear glass that pays tribute to the second-generation split-window Corvette, plus two holes punched in the fender tops to feed cool air directly to the airboxes. New ducts just behind the large side scoops channel air to the rear brakes of both targa and convertible models.
Surprisingly, there are no active aero aids, which might be one reason the track-terror Porsche 911 GT3 RS manages to outdo the ZR1 with its 1,900 pounds of downforce. You can also count on the ZR1 being among the heaviest mid-engine cars on the market. Based on the dry weights Chevy provided, the lightest coupes should tip the scales with a curb weight of around 3,950 pounds while convertibles will likely be on the wrong side of the two-ton threshold. If history is any indicator, the standard magnetorheological dampers and carbon-ceramic brakes will scramble your brain in a way that makes you forget this fact any time you get behind the wheel. Carbon-fiber wheels that save 40 pounds will be offered as a standalone option with or without the ZTK package.
Fast Out of the Gate
Juechter tells us his latest ZR1 is so blindingly fast that it surprised even his engineers. On its first-ever lap of GM’s Milford Road Course, a C8 ZR1 prototype posted a quicker time than the finished C7 ZR1. “If you know anything about vehicle development, you have to crawl, walk, run, and you don’t get to big speed until late in the program,” he said. “This is the first time I can remember where, out of the box, the prototypes were faster than the production version of the car before it. Usually that doesn’t happen until late in the game.”
An early prototype also ran a sub-10-second quarter mile in its first run down the dragstrip. Chevy says it expects the finished car to make a pass in less than 9.7 seconds at 150 mph, but don’t be surprised when the ZR1 isn’t any quicker than the Z06 or the hybrid Corvette E-Ray to 60 mph. The rear-wheel-drive car is up against the limits of traction.
Hurry Up and Wait
New Corvette ZR1 deliveries don’t begin until about a year from now, in the middle of 2025. Chevy insists it isn’t revealing the car this early to draw out the tease. Rather, the company says it’s pulling the cover off the ZR1 now so the engineers can peel the camo off their prototypes. “This car, more than any Corvette we’ve ever done before, needs to have its final test work done without camouflage on it,” Juechter explains. “It’s so edge-of-the-envelope on aero balance, ultimate performance, heat exchangers, all the different aspects of cooling—we can’t really do that work with a bunch of [camo disguise] cladding all over the car. There comes a point in the program where we’ve got to reveal the car to the public so we can drive it around in public. We’re at the point right now. There’s still a fair amount of work to be done.”
This leaves us plenty of time to speculate about the price. When Chevy offered no guidance, we initially estimated a starting price around $180,000. Then we looked back at the 2019 ZR1, which opened at $122,095. Based on that, we think there’s a good chance the new ZR1 starts around $150,000, but even if it comes in higher, you won’t hear us complain. With these credentials, anything less than $200,000 will be a bargain.
More Photos: http://www.thehemi.com/gallery3/index.p ... ZR1?page=2
It just edges out the Demon 170 but what a supercar entry from Chevy!
#Chevrolet #Chevy #Corvette #C8 #ChevroletCorvette #ZR1 #TwinTurbo #1000hpClub