1993 Dodge Dakota Pro Street HEMI
https://www.classicautomall.com/vehicle ... -le-pickup
This is definitely a truck someone needs to buy and take to the track!1993 Dodge Dakota LE Pickup
Pro Street is a style of street-legal custom car popular in the 1980's, usually built to imitate a Pro Stock class race car. Pro Street cars should appear to be more at home on the drag strip than the street, while remaining street legal and not gutted like a Race Car or Bracket Race car. Typically called a Backhalf car (tubbed). Cars of this type always feature two of the following three modifications: a highly modified, with supercharger or turbo, large capacity V8, V12, V10, V6 engine, a narrowed rear axle coupled with oversized rear wheels & at least a 14" wide x 5+” sidewalls tire (located within the wheel wells) for maximum grip and wheelie bars and an NHRA legal roll cage. Cars of this type should remain unmodified from the firewall back, keeping stock floorpans, a full interior with windshield wipers, carpet and working lights.
For consignment I give you this street legal (with the right plates…at least in PA) Pro Stock imitator, and intimidator. Yes, it's a HEMI, yes, its MOPAR, and yes, the inside of this truck appears as normal. That's about it though for the normal stuff.
Excepting the large hood scoop, flare fender kit, with running board addition, rear spoiler, and wheelie bar, this truck would be your everyday un assuming Dodge Dakota pickup. With the rear tubbed to accommodate the wide racing tires, and a totally restored and modified engine bay, no one would suspect otherwise. Although with a turn of the key, you will hear otherwise.
Real wood, and real leather replace the stock black plastic vinyl dash and adorns the oversize padded buckets. A few additional gauges have been added to keep track of all the vitals as you pull up to the line, or should I say traffic light, at the risk of attracting the proverbial “fuzz”? In the middle of the buckets is a Cheetah shifter. A beautifully restored bed lined with thick dark grey felt, and housing 2 red fuel cells sits behind the driver's compartment. This is to have plenty of space to rush your groceries home and to ensure the ice cream is not melted by the time you arrive there.
Brace yourself for the Motorhead terms: Starting at the basics we have a Mopar performance cast iron Hemi block, fitted with CP Hemi pistons which insert into a 4.255 bore/4.150 stroke and operating at a 10.5:1 compression ratio. These are pushed up and down by a Mopar performance 4340 Forged 4.150 stroke, 8 bolt flange crankshaft. A double roller timing chain works with a custom ground solid lifter camshaft, and MSD pro billet distributor and a power master alternator. Sitting atop is a ported Offenhouser intake manifold with twin 4-barrel Edelbrock carbs. Exhaling is done through long tube headers, and a Borla exhaust.
In a very clean and rust-free environment we note Caltracs bars, a narrowed Dana 60 Rear, manual brakes with disc in front and drum in rear, and a line lock kit.
A well-documented build with photos and receipts can dig deeper into the surface of this redux/transformation. Plenty of attention was paid to performance and then wrapping it in an interesting exterior. Definitely a one of a kind Dakota Pro Street (legal) truck.
Classic Auto Mall is a 336,000-square foot classic and special interest automobile showroom, featuring over 300 vehicles for sale with showroom space for up to 1,000 vehicles. Also, a 400 vehicle barn find collection is on display.
This vehicle is in our showroom in Morgantown, Pennsylvania, conveniently located just 1-hour west of Philadelphia on the I-76 Pennsylvania Turnpike. The website is www.classicautomall.com and our phone number is (888) 227-0914. Please contact us anytime for more information or to come see the vehicle in person.
#Dodge #Dakota #DodgeDakota #ProStreet #HEMI #426HEMI #Mopar