Mecum: 650-hp 1967 Dodge Charger 528 HEMI

Post the HEMI items you have forsale.
Post Reply
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Mecum: 650-hp 1967 Dodge Charger 528 HEMI

Post by scottm »

Image
Image Image Image Image

1967 Dodge Charger Resto Mod
528/651 HP, Professional Build
https://www.mecum.com/lots/AZ0320-40520 ... resto-mod/
* Professional build by Johnson's Hot Rod Shop
* The body, chassis and suspension was engineered to achieve its desired stance and profile
* Ray Barton 528/651 HP Hemi V-8 engine with 618 lb-ft of torque
* Bowler 4L80E automatic transmission
* Dana 60 rear end with 35-spline axles and 3.50 gears
* Magnum Force K-member with tubular control arms and sway bar
* Magnum Ford 4-link rear suspension
* RideTech coilovers on all four corners
* 14-inch Viper disc brakes
* 18x9-front and 19x12 rear Billet Specialties Lobeck wheels
* Narrowed and flushed front and rear bumpers
* The front bumper has openings to provide air transmission and power steering coolers
* The rear bumper has horizontal openings for the dual exhaust tips
* New transmission and driveshaft tunnel to tuck the driveline closer to the body
* The rear wheel wells were moved 3-inches inward on each side
* Mopar Performance iron block bored to 4.500-inches
* Aluminum heads with 2.375/1.900-inch valves
* Cross Ram intake with dual Edelbrock 650 cfm carburetors
* Barton 4.150 Forged crank and billet steel rods
* JE 10.0:1 pistons, Barton Hydraulic roller cam
* MSD 6AL ignition with Mopar Performance distributor
* Long-tube headers and x-pipe, Magnaflow mufflers
* Featured on the cover of Popular Hot Rodding in April 2012
Wow, this is definitely a professional build. What a nice looking Charger!

#Dodge #Charger #DodgeCharger #HEMI #528HEMI #RayBarton #Mecum #Mopar
Post Reply