Anyone interested in how we built an K&N air filtered, 6 inch cowl induction, fiberglass hood to go over a 572 KB Hemi with a Hogans Tunnel Ram with twin dominators? (This will work on any hood.)
We are going to seal under the bottom with a scoop tray and foam.
We did it with our own design and help from 5 manufacturers' products.
Send a PM and I can go over it with you.
Cowl Induction, K&N air filtered scoop
Moderators: scottm, TrWaters, 392heminut
-
- Posts: 433
- Joined: Sat Dec 01, 2001 6:00 pm
- Location: Maryland
-
- Posts: 433
- Joined: Sat Dec 01, 2001 6:00 pm
- Location: Maryland
I do not need to check, we have the hood completed, matter of fact, we are doing a second simular one next month for a guy in South Carolina.
I use AutoFab race chasis shop, a fulltime professional sheetmetal fabrication shop, for anything I do not want to do myself. They can make you one, need the telephone number?
I also get my machine work done by a fulltime local company, have plenty of hemi parts, or can order them. Thanks anyway. You have a nice Thanksgiving now.
Update 7:40 AM 10/22/06 OFF to he machine shop, they called and need the BHJ 4.560 Hemi torque plate to do a couple of blocks......
I use AutoFab race chasis shop, a fulltime professional sheetmetal fabrication shop, for anything I do not want to do myself. They can make you one, need the telephone number?
I also get my machine work done by a fulltime local company, have plenty of hemi parts, or can order them. Thanks anyway. You have a nice Thanksgiving now.
Update 7:40 AM 10/22/06 OFF to he machine shop, they called and need the BHJ 4.560 Hemi torque plate to do a couple of blocks......