426 Hemi damper

Discussion of the 426 Street / Strip HEMIs.

Moderators: scottm, TrWaters, 392heminut

Post Reply
gregem
Posts: 4
Joined: Fri Jul 22, 2005 10:24 pm
Location: Houston

426 Hemi damper

Post by gregem »

I have a harmonic damper I took off a 426 years ago; I believe it is an original Plymouth part.

It looks like it has a cast iron center with a steel outer ring. It has degree marks in 1 degree increments on either side of TDC and a single 180 degree mark opposite of TDC.

Is this what an original damper should look like? I wonder because of the degree marks.

Thanks,
Post Reply