Hi!
I’m looking for a cam spec card for a stock 331-354 Hemi, and was hoping someone here could have one or know where to get it.
I hope you have the time to help me.
Thanks
Per Lundholm, Skelleftea
Sweden
Cam card
Moderators: scottm, TrWaters, 392heminut
Re: Cam card
If you can post what the application was, I may have some info in one of my service manuals.
Early hemi to late sb Mopar trans adapters. Precision billet parts for early hemis.
-
417Donovan
- Posts: 4
- Joined: Fri May 23, 2008 10:29 am
Re: Cam card
Sounds good!
We have 2 engines.
First is a 331 Hemi C542 1954 4 barrel carb 235hp from a New Yorker(according to Hemi-id pages on the web)
second is a 354 Hemi NE56 1956 4 barrel carb 280hp also from a New Yorker(according to Hemi-id pages on the web)
What we're looking for particulary is timing for intake open/close, exhaust open/close, lobe separation ....
Thanks TrWaters, for taking the time to help us!
Per Lundholm, Skelleftea
Sweden
We have 2 engines.
First is a 331 Hemi C542 1954 4 barrel carb 235hp from a New Yorker(according to Hemi-id pages on the web)
second is a 354 Hemi NE56 1956 4 barrel carb 280hp also from a New Yorker(according to Hemi-id pages on the web)
What we're looking for particulary is timing for intake open/close, exhaust open/close, lobe separation ....
Thanks TrWaters, for taking the time to help us!
Per Lundholm, Skelleftea
Sweden
-
dan miller
- Posts: 86
- Joined: Wed Dec 27, 2006 5:05 am
Re: Cam card
It's not difficult to check a cam out. Just plug it into a block (don't forget - 392's are different than "low deck" engines), grab a dial indicator, degree wheel, and a pointer, and go to work.
Danny
Danny