Page 1 of 1

A279 "Ball Stud" Hemi

Posted: Fri Aug 12, 2005 2:01 pm
by scottm
A279 "Ball Stud" Hemi

Originally thought of as a replacement for the wedge engines,
the "Ball Stud" Hemi was designed to be a cheap alternative to
compete with the low-cost Chevy big-blocks. They were based
on 2-bolt B-blocks, available in B and RB strokes, to make 404
and 444 cubic inch motors. The heads get Hemi chambers that
are slightly twisted and shallower than the 426 Hemi.

Here are some pictures and an excerpt from an article...

Image Image

Image Image Image Image

Does anyone else have any more information on these engines?
Also feel free to correct me if I am wrong with anything I stated.

Posted: Fri Aug 12, 2005 6:12 pm
by 392heminut
It sure is a shame that engine never made it to production. :(

Posted: Thu Aug 18, 2005 6:55 am
by firepower354
Hot Rod had a pretty complete article on the ball-stud jobs in the early 80's (?) I lost that whole era from my collection, but with the vast resources of the internet I'm sure a copy could be found. Looked to be a decent setup if memory serves me. Lighter pistons than the hemi through the smaller chambers gaining quench and swirl, much less expensive machining required for the rocker gear, freer ports than the wedgies. Somewhere between an early poly and a 429 street boss chamber. Dick Landy's supposed to have one. Maybe he'd send pics and info?

Posted: Wed Aug 24, 2005 8:18 pm
by scottm
I updated my original post with the full article.
(Special thanks to Hemi Fred for those scans.)

Posted: Thu Aug 10, 2006 7:53 am
by 2SLO4U
Image

saw this at the carlisle PA show...

Posted: Thu Aug 10, 2006 12:40 pm
by speedicusmaximus
Hi,
Yep HR did do the feature in the early 80's. But Popular Hot Rodding also covered it fairly recently too - within 1 or 2 years anyway. Weirdly, one of the Mopar magazines, Mopar Muscle ?, ran a picture asking if anyone new what it was ........
Doh !
Has anyone any knowedge if the last picture (a B-body ?) was a running car ?
Who did it belong to ?
Mike

Posted: Thu Aug 10, 2006 12:44 pm
by 2SLO4U
it was at Carlisle this year (2006) and it is apparently a running car - Tom Hoover's old barracuda test bed.

it was recently featured in a 2 part article in Mopar Collector's Guide - one on the rebuild of the engine followed by the resto of the car.

both looked really nice in person. sadly, the photo of the car did not turn out...

Posted: Thu Aug 10, 2006 12:56 pm
by speedicusmaximus
Hi 2SLO4U,
Thanks for the information.
Don't suppose anyone's got a copy of the feature in Mopar Collectors Guide we could (all) look at ?
Mike