Page 1 of 1
Bonneville Hemi for a 305 CuIn class break
Posted: Wed Mar 26, 2014 10:56 pm
by Sparky-2210
Building a 304 cu in HEMI for Bonneville---I am new to Hemis --- I have never run one -- I am dumber than a box of rocks about them. What head should I look at to put on a 291 DeSoto if I want to build a 10 to 1 compression ratio that I will run with 90% + Nitro?
Re: Bonneville Hemi for a 305 CuIn class break
Posted: Thu Mar 27, 2014 3:18 pm
by speedicusmaximus
Try the following link for (probably) all the information you'll need;
http://www.hothemiheads.com
Good luck with the project, and keep us updated !
Mike
Re: Bonneville Hemi " C DE NITRO"
Posted: Thu Mar 27, 2014 6:02 pm
by Sparky-2210
I posted a Wanted to Buy post on Landracing.com and 2 of my LSR buddies hooked me up with Tom Sauter of TNT HEMI ENGINES in Lake Havasu City AZ he has a good selection of parts and he is going to hook me up with a block that needs repair for a mock up. I will need to put lots and lots of "FEATURES" to get a 60 year old to live for 5 miles with over 90%
Re: Bonneville Hemi for a 305 CuIn class break
Posted: Sat Mar 29, 2014 9:00 pm
by George
High deck heads & custom pistons made for your set up. I'd check with Quality Engineered Components.