Bonneville Hemi for a 305 CuIn class break

Discuss the Hemi in current auto racing.
Post Reply
Sparky-2210
Posts: 8
Joined: Wed Mar 26, 2014 10:55 am

Bonneville Hemi for a 305 CuIn class break

Post by Sparky-2210 »

Building a 304 cu in HEMI for Bonneville---I am new to Hemis --- I have never run one -- I am dumber than a box of rocks about them. What head should I look at to put on a 291 DeSoto if I want to build a 10 to 1 compression ratio that I will run with 90% + Nitro?
speedicusmaximus
Posts: 143
Joined: Thu May 18, 2006 11:31 am
Location: UK

Re: Bonneville Hemi for a 305 CuIn class break

Post by speedicusmaximus »

Try the following link for (probably) all the information you'll need;

http://www.hothemiheads.com

Good luck with the project, and keep us updated !

Mike
Beep ! Beep !
Sparky-2210
Posts: 8
Joined: Wed Mar 26, 2014 10:55 am

Re: Bonneville Hemi " C DE NITRO"

Post by Sparky-2210 »

I posted a Wanted to Buy post on Landracing.com and 2 of my LSR buddies hooked me up with Tom Sauter of TNT HEMI ENGINES in Lake Havasu City AZ he has a good selection of parts and he is going to hook me up with a block that needs repair for a mock up. I will need to put lots and lots of "FEATURES" to get a 60 year old to live for 5 miles with over 90%
Last edited by Sparky-2210 on Sat Apr 05, 2014 8:59 am, edited 1 time in total.
George
Posts: 694
Joined: Wed Aug 25, 2004 4:12 pm
Location: Fl

Re: Bonneville Hemi for a 305 CuIn class break

Post by George »

High deck heads & custom pistons made for your set up. I'd check with Quality Engineered Components.
Post Reply