528 in 2001

Discussion about the Hemi in general.

Moderator: scottm

Post Reply
nottslow
Posts: 1
Joined: Sun Aug 13, 2006 8:43 am

528 in 2001

Post by nottslow »

how hard is it to shoehorn a 528 into a 2001 ram 1500?? anyone ever done it??
mr fabrication
Posts: 12
Joined: Wed Aug 09, 2006 2:21 pm
Location: PA

Post by mr fabrication »

I talked to a guy with a 426 in his 1996 ram and it seemed to fit really well. I seen it a a show it was really nice. so i dont know if that helps but at least i know it can be done and also looked to fit well.
speedicusmaximus
Posts: 143
Joined: Thu May 18, 2006 11:31 am
Location: UK

Post by speedicusmaximus »

Hi,
Hot Rod magazine did this a couple of years ago. But there's might have been a Dakota - my memory's a little blurred on the details. The biggest problem is the steering, exhaust and engine and gearbox mounts - expected stuff really !
Mike
Beep ! Beep !
GONE1445
Posts: 42
Joined: Fri Jun 17, 2005 9:57 pm
Location: Michigan

Post by GONE1445 »

there was a 528 dropped in an 02 dodge ram the article said it was pretty easy just had to make the rad stright and not angled

it should fit pretty easily in your 01 heck they fit a 528 in a dakota to if they can do that then you can do it on your 01
2003 ram R/C bone stock for now mmmmmwwwaaahahahahahahhah
Post Reply