'07 Hemi Crate Motor Questions

Discussion of the 5.7L-6.1L-6.4L HEMIs.

Moderator: scottm

Post Reply
jerkyboy
Posts: 1
Joined: Mon May 31, 2010 7:57 pm

'07 Hemi Crate Motor Questions

Post by jerkyboy »

My '68 Dart's prior owner swapped in an '07 Hemi crate motor. I have two questions, should the idler pulley be utilized (check out pick) and how quickly should it come down to idle when you rev it? If the car is in neutral and you rev it up, it doesn't idle down nearly as quickly as my carbureted 350 that I had in my Nova.
You do not have the required permissions to view the files attached to this post.
speedicusmaximus
Posts: 143
Joined: Thu May 18, 2006 11:31 am
Location: UK

Re: '07 Hemi Crate Motor Questions

Post by speedicusmaximus »

Jerkyboy,

Try this website for a picture of the belt routing:

http://www.google.com/imgres?imgurl=htt ... s%3Disch:1

(Scroll down slightly on the page)

I wonder if you've got the correct belt on the engine ?

Try some of the Gen III Hemi crate motor suppliers (Bouchillon Performance ?) They've likely come across this problem before with customers as they supply almost everything you'll ever need.

http://www.bouchillonperformance.com/Default.asp

As for the idle problem, I don't know. Bouchillon again ?

Mike
Beep ! Beep !
Post Reply