5.7 HEMI tick in 2005 RAM 1500

Discussion of the 5.7L-6.1L-6.4L HEMIs.

Moderator: scottm

Post Reply
adkraptor
Posts: 2
Joined: Wed Feb 27, 2008 2:16 pm

5.7 HEMI tick in 2005 RAM 1500

Post by adkraptor »

hey guys,
i have been reading all the posts on the hemi "tick". i bought a used 2005 with 30,000 on it and it ad the noise.
they found it to be a bad connecting rod bearing on the driver side,
dont let anyone tell you that noise is supposed to be there NOT TRUE
Sharadon
Posts: 4
Joined: Sun Nov 26, 2006 3:20 pm

Re: 5.7 HEMI tick in 2005 RAM 1500

Post by Sharadon »

Sorry to hear that.

The Hemi TICK is just that a slight tick. Many have it.
Denny
2SLO4U
Posts: 58
Joined: Thu Jun 24, 2004 7:31 am
Location: Gainesville, FL
Contact:

Re: 5.7 HEMI tick in 2005 RAM 1500

Post by 2SLO4U »

mine has it. truck had 11K on it when i got and now it has around 42K - still ticking (pun intended)...
2003 1500 HEMI 2WD Laramie
1964 D100 426W High Performance Package
Spencer1370
Posts: 1
Joined: Thu Aug 13, 2009 1:27 pm

Re: 5.7 HEMI tick in 2005 RAM 1500

Post by Spencer1370 »

I have a 2004 ram 1500 with the 5.7L Hemi. I got this truck with 26000 miles in 2005 and it had the tick then not so loud but still there... fast forward to today 2009 93541 miles and I am seconds away from replacing the connecting rod bearings....and I pray that the crank has not been damaged by the prolonged use. It is not something you should hear...Fix it before it gets bad!check the journals on the crank mine looked fine but one was turned about .010 and I did not notice until it was all put back together ....
Post Reply