mds swap

Discussion of the 5.7L-6.1L-6.4L HEMIs.

Moderator: scottm

Post Reply
helliotracing
Posts: 14
Joined: Mon Sep 17, 2007 10:52 pm
Location: ohio

mds swap

Post by helliotracing »

Do I need to change all the lifters when I change to a non mds because of the lifter size being different on the guides? If so any leads on a complete swap kit? block off plates, lifters, gaskets, guides and anything else there is .
It will run rich forever but it will only run lean once.
hemidup
Posts: 88
Joined: Fri Sep 29, 2006 9:47 am

Post by hemidup »

You only have to replace the 4 MDS lifters.
392 Blown Hemi
Post Reply