Well 1st. of all would like to say hello. would like to know if I can get some help IDing this HEMI motor I just picked up the other day?The guy I picked up from told me it was a Chrysler Marine 354 but on the front off the block was written with a sharpy 331 STD. This is my 1st HEMI so I know very little on these motor's I did try to look up the number's on the net I found on the block but no luck. Here is the number's on the block I found:1330129-1 .B54. CWC and the intake it came I know won't work due to both heads were ported BIG time. I bought the motor complete but was all taken apart and put in crate's so if any of you could help me out here that would help me out alote.
Thanks you
[/img]
Newbie with a question on IDing my HEMI
Moderators: scottm, TrWaters, 392heminut
-
- Posts: 2
- Joined: Mon May 14, 2007 7:50 pm
- Location: Santa Ana, CA.
- Contact:
-
- Posts: 2
- Joined: Mon May 14, 2007 7:50 pm
- Location: Santa Ana, CA.
- Contact:
Thanks
Thanks George for the much needed info help now I know what parts to buy and I looked in front by the vally cover and couldn't find any number's there?
Thanks
Jose
Thanks
Jose