Hey George ,where are you on your boat?
Mine is running well now,haven’t moved it,next move is slowly,500 feet down the canal, to ramp and pull out and check.
Search found 9 matches
- Mon Dec 11, 2017 7:44 am
- Forum: Marine / Industrial Hemis
- Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
- Replies: 15
- Views: 33120
- Thu Oct 19, 2017 9:05 pm
- Forum: Marine / Industrial Hemis
- Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
- Replies: 15
- Views: 33120
Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis
THE BOOK,,, The Chrysler manual I will take a picture of it and post. Its the blue and yellow manual with the engine pictured on the front. I have had that book since day one its 61 years old like the boat. OH AND THE BOOK IS CORRECT (I AM DUMB). Both dists turn clock wise. ( I AM DUMB TO SAY THE BO...
- Tue Oct 17, 2017 9:27 pm
- Forum: Politics
- Topic: Florida professor tweets Texas deserved Harvey for supporting Trump
- Replies: 2
- Views: 5431
Re: Florida professor tweets Texas deserved Harvey for supporting Trump
Liberals as such should all be beat the crap out of till they se reason and want America Great again.
Stand for the flag , kneel to,pray OR YOU ARE A TRAITOR.
Stand for the flag , kneel to,pray OR YOU ARE A TRAITOR.
- Tue Oct 17, 2017 9:24 pm
- Forum: Off-Topic
- Topic: Harvey Weinstein Paid Off Sexual Harassment Cases for Years
- Replies: 4
- Views: 6558
- Tue Oct 17, 2017 9:15 pm
- Forum: Marine / Industrial Hemis
- Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
- Replies: 15
- Views: 33120
Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Well port turns left stab turns right so distributors also must turn counter, yet in the book they show same rotation! The book HAS TO BE WRONG. I will go tomorrow and check for sure. I got the running well , well enough for the little bit it moves. Points and carb are so simple since I have been at...
- Sun Oct 15, 2017 9:34 pm
- Forum: Marine / Industrial Hemis
- Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
- Replies: 15
- Views: 33120
Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis
And what is B or RB mean in the reference of distributors??
- Sun Oct 15, 2017 9:32 pm
- Forum: Marine / Industrial Hemis
- Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
- Replies: 15
- Views: 33120
Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis
2x1 needs kits,really they need accelerator cups or pistons, WHERE. .? Do I find kits?
- Sat Oct 14, 2017 8:13 pm
- Forum: Marine / Industrial Hemis
- Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
- Replies: 15
- Views: 33120
Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Thanks George,yes they are counter rotating,facing transome ,port is left hand stab right hand. So I can make a shaft for the distributors ,I have a machine shop. So I need the ignition module from a Chrysler car ,are they all the same? Would it be an ignition system from the 70's cars I assume? Tha...
- Sat Oct 14, 2017 8:52 am
- Forum: Marine / Industrial Hemis
- Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
- Replies: 15
- Views: 33120
Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Here is a 1956 copy of a Chris Craft Constellation,it has twin331 M45s engines,been in the water for 61 years! I wish for someone to give me some contacts for carburetor and ignition upgrades! This is in StMartin Parish Louisiana,where the boat lives, it was built in New Orleans Louisiana in 1956, a...