Search found 5 matches

by hughc
Sun May 22, 2011 11:57 pm
Forum: Projects and Products
Topic: Problem with oil pump and engine mount
Replies: 0
Views: 3173

Problem with oil pump and engine mount

Hi all, I wonder if someone could help me? I am having trouble getting the oil system to fit. The pump that I bought from 440source (2001102a.jpg & 2001102b.jpg) is fouling the Schumacher Engine Mounts. The dash-12 fitting next to the pressure relief valve fouls the engine mount. You can see the...
by hughc
Sat Nov 21, 2009 7:14 pm
Forum: (LEGACY) 426 Street / Strip HEMIs
Topic: Airfilter to use with Air Horns
Replies: 1
Views: 5207

Airfilter to use with Air Horns

Dear All,
Can someone give me advice as to what type of air filter you should use with Hemi Air Horns P/N P5007809?

Thanks in advance,
Hugh
by hughc
Sat Aug 22, 2009 7:20 pm
Forum: General Hemi Discussion
Topic: My 426 is now in a car
Replies: 1
Views: 2207

My 426 is now in a car

Dear All, I have put my 426 Hemi in a car. Here are the photos of the test installation. Hemi Test Fit.jpg . I am putting it in a Jensen Interceptor to replace the 440. It fits pretty well except it is very tight at the back of the motor and will need some slight modification to the firewall. best w...
by hughc
Sat Jun 20, 2009 12:26 am
Forum: (LEGACY) 426 Street / Strip HEMIs
Topic: Advice on Cashaft selection
Replies: 0
Views: 4463

Advice on Cashaft selection

Dear All, Last week end I started to pull apart my Hemi to do an engine swap with the 440. It is in Very very good order with unmolested heads. It has very domed Arias pistons +60 thou in it and a Crower 1/2 inch Stroker Forged crankshaft. My guess is that the compression ratio is going to be high (...
by hughc
Sat Jun 20, 2009 12:16 am
Forum: Decode My Hemi
Topic: can you tell what car my engine was in???
Replies: 1
Views: 4664

can you tell what car my engine was in???

Dear All, Is there anyway of telling what car my engine was in when it was delivered? Scott has told me this from the stamping on the engine plate. As for the decode... CH426 = 1967 engine Maltese Cross = .001" undersized bearing shells 12 = month 16 = day 09 = engine # for the day Thanks in ad...