Search found 7 matches

by Von MoPar
Sun Oct 17, 2010 7:57 pm
Forum: (LEGACY) Early Dodge / DeSoto HEMIs
Topic: 1954 241 Dodge Hemi Hardened Valve Seats
Replies: 1
Views: 5600

1954 241 Dodge Hemi Hardened Valve Seats

Just need confirmation on the 54 241 Dodge Hemi Heads I have been told the heads have hardened valve seats for unleaded gas, I have S/steel valves from Egge so what's the story ? do I need to used a valve saver additive in the unleaded fuel ?
by Von MoPar
Thu Oct 07, 2010 7:11 pm
Forum: (LEGACY) Early Dodge / DeSoto HEMIs
Topic: 241 Dodge Hemi 1954 block & heads
Replies: 4
Views: 8394

Re: 241 Dodge Hemi 1954 block & heads

Thanks for the info Bob, I have installed the adjustable push rods & setting the lifter preload, started off at zero lash & then going one full turn on the adjuster, seems chattery on cold start up so I am going to redo the adjustment to 1 1/2 turns and monitor things from there, also noted ...
by Von MoPar
Thu Jun 03, 2010 12:15 am
Forum: (LEGACY) Early Dodge / DeSoto HEMIs
Topic: 241 Dodge Hemi 1954 block & heads
Replies: 4
Views: 8394

241 Dodge Hemi 1954 block & heads

I have a question regarding the 241 Dodge push rods HOTHEADS part number #21087S1/4 push rod with 3/8" tube diameter size I have purchased, I am using standard lifters & rocker arms........ the original push rods are 5/16” with 1/4" ends to suit the standard lifter & rocker arms an...
by Von MoPar
Wed Nov 21, 2007 9:41 pm
Forum: (LEGACY) Early Dodge / DeSoto HEMIs
Topic: Spark Plug Tubes
Replies: 6
Views: 10590

Thanks George :)
by Von MoPar
Wed Nov 21, 2007 4:59 pm
Forum: (LEGACY) Early Dodge / DeSoto HEMIs
Topic: Spark Plug Tubes
Replies: 6
Views: 10590

what happens if you don't?
by Von MoPar
Tue Nov 20, 2007 5:14 pm
Forum: (LEGACY) Early Dodge / DeSoto HEMIs
Topic: Spark Plug Tubes
Replies: 6
Views: 10590

241 dodge hemi spark plugs

did you say take the washer off the spark plug? :o
by Von MoPar
Tue Nov 20, 2007 5:12 pm
Forum: (LEGACY) Early Dodge / DeSoto HEMIs
Topic: Valve Cover Studs/Bolts..241 Hemi
Replies: 3
Views: 8085

241 dodge hemi

Yes it's the top ones, does any one make some nice long studs suitable for the Obrien Trucker covers?