Search found 80 matches
- Thu Aug 27, 2009 6:32 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: 5,7 Hemi MSD 6hemi controller problem
- Replies: 10
- Views: 8276
Re: 5,7 Hemi MSD 6hemi controller problem
No problem, anytime. I don't visit this site as much as I should, sorry, but if you have any questions about these new school Hemi's? Give us a call at the shop and ask for Denny. 651-426-0061
- Thu Aug 27, 2009 2:17 am
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: 5,7 Hemi MSD 6hemi controller problem
- Replies: 10
- Views: 8276
Re: 5,7 Hemi MSD 6hemi controller problem
Initial timing is 10 degrees at idle.
- Sun Aug 23, 2009 12:44 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: 5,7 Hemi MSD 6hemi controller problem
- Replies: 10
- Views: 8276
Re: 5,7 Hemi MSD 6hemi controller problem
We've been dyno testing a few of our engines finally. We broke down and bought an AEM standalone for the dyno sessions. 21 degrees of timing is where we seen the most tq and hp. We tried everthing from 18 to 27 and at 27*'s we heard a slight tickle so we started backing off the timing. Egt's on all ...
- Sat Apr 05, 2008 11:33 am
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: 06,07 Charger wiring schematic
- Replies: 1
- Views: 2707
The wiring is going to be a headache, if even possible, with the drive by wire throttle body and the fully electronic controlled 722.6 trasmission. If I were you, I'd opt for a 727 behind the 5.7. Then get yourself a cable controlled throttle body, wiring harness and PCM from Mopar Performance. That...
- Wed Feb 06, 2008 8:39 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: Gen III Hemi specs.
- Replies: 10
- Views: 10223
- Sun Feb 03, 2008 4:34 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: Gen III Hemi specs.
- Replies: 10
- Views: 10223
- Sat Feb 02, 2008 2:15 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: Gen III Hemi specs.
- Replies: 10
- Views: 10223
- Sat Feb 02, 2008 12:49 am
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: Gen III Hemi specs.
- Replies: 10
- Views: 10223
- Wed Jan 30, 2008 10:07 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: Gen III Hemi specs.
- Replies: 10
- Views: 10223
- Fri Jan 25, 2008 7:33 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: 5.7 / 6.1 Engine Mgmt from FAST
- Replies: 1
- Views: 3466
- Fri Nov 23, 2007 9:28 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: mds swap
- Replies: 1
- Views: 3362
- Fri Nov 23, 2007 9:23 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: XV 5.7 and 6.1 HEMI Single Plane Intake Manifolds
- Replies: 6
- Views: 8602
- Fri Nov 23, 2007 9:20 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: XV 5.7 and 6.1 HEMI Single Plane Intake Manifolds
- Replies: 6
- Views: 8602
- Wed Nov 21, 2007 9:26 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: XV 5.7 and 6.1 HEMI Single Plane Intake Manifolds
- Replies: 6
- Views: 8602
I just purchased a XV, FI 5.7 intake. I sent it off to Knowlton's for testing. This intake kick's butt compaired to the 5,7 Mopar Performance crate intake. 97.5% efficient right out of the box. To make the 5.7 crate intake that efficient, I had to add the TWaters intake spacers and modify the floor ...
- Sun Oct 07, 2007 1:59 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: vid of my 6.4/392 supercharged Hemi in action
- Replies: 6
- Views: 7183
- Tue Sep 18, 2007 1:22 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: vid of my 6.4/392 supercharged Hemi in action
- Replies: 6
- Views: 7183
- Tue Sep 18, 2007 11:40 am
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: vid of my 6.4/392 supercharged Hemi in action
- Replies: 6
- Views: 7183
vid of my 6.4/392 supercharged Hemi in action
My 4x4 truck weighs in at 5139 lbs. http://media.putfile.com/SharaDon-Perfo ... Rumble-Bee
- Tue Sep 18, 2007 10:31 am
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: adding tach with 5.7 carb crate motor
- Replies: 3
- Views: 3622
Re: adding tach with 5.7 carb crate motor
I have a 67 Barracuda with the carb crate hemi and want to add a tach. I found a Mopar Perf tach adapter but can't find instructions for it. Seems like what I've found so far requires re-wiring one entire bank of coils (AutoMeter and MSD). Anyone got a better solution? Are you running with the stoc...
- Thu Sep 13, 2007 9:38 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: hemi flex plate, 727 - 5.7
- Replies: 9
- Views: 8940
According to the article in the June 2007 Hot Rod magazine where they swapped a 5.7 into an A body, the 426 hemi flexplate will work also. I haven't confirmed this myself, so it would be best to check it out before going that route. I have a spare 426 hemi flexplate packed away in storage and when ...
- Wed Sep 12, 2007 4:05 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: hemi flex plate, 727 - 5.7
- Replies: 9
- Views: 8940
According to the article in the June 2007 Hot Rod magazine where they swapped a 5.7 into an A body, the 426 hemi flexplate will work also. I haven't confirmed this myself, so it would be best to check it out before going that route. I have a spare 426 hemi flexplate packed away in storage and when ...
- Fri Aug 10, 2007 11:49 am
- Forum: Crate Hemi Engines
- Topic: Rich running 472
- Replies: 5
- Views: 10936
- Fri Aug 10, 2007 10:27 am
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: 5.7 & 6.1 Hemi 4" crank
- Replies: 8
- Views: 8523
- Wed Jul 25, 2007 5:37 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: New Hemi Builder's Guide: 2003-Present
- Replies: 6
- Views: 6621
- Sun Apr 15, 2007 8:20 am
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: 03 Ram electrical problem
- Replies: 3
- Views: 3982
- Fri Mar 30, 2007 4:34 pm
- Forum: (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- Topic: Intake spacers,rockershaft collars and new cam are next.
- Replies: 0
- Views: 3176
Intake spacers,rockershaft collars and new cam are next.
Thanks to TrWaters, a sponser here on this site, his upgraded rockershaft collars came in along with his intake spacers. The rockershaft collars replace the cheap spring steel OEM's and I will be experimenting using his intake spacers to help out the poorly designed crate MPI intake. I'll be off to ...