TheHEMI.com

factory-02 sensors-Ford & GM SENSORS-426 ON GAS WAS 42 POUND INJECTORS-426 on E-85 IS 80 POUND INJECTORS

WE HAVE THE MEGASQUIRT ON ARE 6.1/426 HEMI,ALSO USED IT WHEN WE HAD A 5.7 HEMI IN
OUR Road Runner.bought an extra one to use on or dyno,works very well. Bob Kammer
check or post on supercharged RR hemi,also changed to e85

Nothing will work with the factory set-up. Everything behind the water pump are belt tensioners,
adjusters.Like my RR when You are done it will be one of a kind.

I will send Sott a picture of our proto type plate we designed,If you used this plate and x-brand water pump it would be very time consuming to redo all your pullys and brackets.

Since my last post 5.7 Hemi w/ small super charger #3 Had the car running last fall,not finished,no chrome,not detailed etc. We drove the Road Runner about 300 miles,lost four piston tops on the drivers side Engine showed no signs of anything wrong,except some spark gaps had tighten up. At that time...

We do not run the stock computer,have a msd for coil packs & megasquirt for fuel.
The car has been running for a month with no problums at all.
can come out at an idle or up on the converter with no bog or hesitations
car also runs at 180 degrees

Nov21,2007 posted about a supercharger were installing on a 5.7 Hemi May23,2008 We changed the stock s/c off of a ford lighting with a Kenne Bell,used the new MSD coil pack computer,with a magasquirt computer for the fuel system.The engine started instantly and was tuned with two computers in less t...

My first post was on 12.15.05 at that time we were installing a 5.7 Hemi in a 1969 RR. plans were basic stock engine,reprogramed computer,stock intake etc. Had all the parts ready to install,then it happened, a friend of mine brought in his ford lighting,we dynoed his engine with a new Kenne Bell SC...

Rechecked heads the part # is 2468596 also has CWC in casting no
Mopar penastar. Did Mopar let other manufactures produce heads in the early 60s?.Heads take the old k-head valve covers.This casting # looks
like what Mopar would have used. thank again

Have a set of 426 Hemi heads casting# 2468596. never been cut for double springs, never raced. I beleive the heads are 1964-k heads.
Heads my be sold to a customer in Flordia,just need more info before i let them go. Thank you

Talked to a friend at Mopar performance today,said Edelbrock will have a two four inline intake for the 5.7/6.1 Hemi.he has seen a chrome proto type.I thought i had made up my mind to run the fuel injection,as of today i will buy the 2x4 intake when ready.

I would stick with what u know.Its cheaper and easier. We run the fast systems on 2 of r trucks,and 1 old electramotive on a 360 2 barell throttle body stocker truck. We built (45) 318 mpi engine for the Detroit truck plant about 4yrs ago to be tested and abused behind some proto type transmissions....

At this time were having the pcm reprogramed,been weighting a long time Have a 2003 and 2005 5.7, wireing for a 2005. will keep the FI at this time manifold? by the time car is ready there will be manifolds ready for resale Trans:I talked to Ron Mancine he is installing a 5.7 in a cobra,the tailshaf...

New to forum,would like to see a forum for new Hemi swaps 5.7 6.1 etc. Were doing a 5.7 swap to a 1969 RR lots of questions when we started Trans hook up,engine mounts,headers,oil pan,pulleys,harminic balancer,intake manifold,brackets and so on. Have solved many problems, but there are going to be m...